Products Description
|
Product name |
Crankshaft |
|
Part number |
376-4075 |
|
Excavator model |
C6.6 |
|
Lead time |
1-3 days after payment |
|
Packing |
neutral/original |
|
MOQ |
1 PC |
|
Quality |
high quality |
|
Warranty |
3-6 months |
|
Shipping |
DHL, UPS, FedEx, Air, Sea, DDP |
|
Payment |
TT/Alibaba Trade Assurance/Credit card/Western Union/Alipay/Wechat |
DETAILED PHOTOS






376-4075 C6.6 Crankshaft
| Parameter Type | Specific Value |
|---|---|
| Engine Stroke | 127.00mm |
| Main Journal Diameter | 84.00mm |
| Connecting Rod Journal Diameter | 72.00mm |
| Rear Oil Seal Diameter | 133.00mm |

Shipping Methods
- By express: DHL,UPS,FedEx,Aramex,TNT,EMS,SF express.
- By air to the airport.
- By sea to the port.
- DDP by air or by sea
- To your freight forwarder in China.

FAQ
Q:Why does the crankshaft make abnormal noises and deform?
A: A bent crankshaft can cause the center of rotation to shift, resulting in interference with surrounding components and abnormal noise during operation. In addition, excessive axial clearance or loose fit between the main journal and the bearing can also cause a "clanging" noise at idle speed, and the noise will intensify at low and medium speeds.
Q:Why do crankshafts crack and break?
A:This is a fatal fault, often caused by loose flywheel bolts disrupting dynamic balance, misalignment of main bearings leading to bearing failure and bearing seizure, or premature oil supply causing alternating stress impact on the crankshaft. It could also be due to poor quality of the aftermarket crankshaft itself, which is prone to cracking or even breakage after long-term high-load operation. The breakage location is often concentrated at the connection between the connecting rod journal fillet and the crank arm.
Q:What are the causes of journal wear and bearing failure?
A:If the engine oil is not changed on time, the oil passage is blocked leading to poor lubrication, or impurities such as construction dust are mixed in the engine oil, uneven wear of the main journal and connecting rod journal will occur. When the clearance exceeds the limit, the crankshaft impact on the bearing can also cause alloy to fall off and the bearing to burn out, accompanied by an alarm for low engine oil pressure.
Q:What are the causes of abnormal damage to the thrust surface and thrust bearing?
A:This fault can affect the axial positioning accuracy of the crankshaft. Common causes include poor lubrication leading to increased friction on the thrust surface, or the thrust surface itself not meeting the required roughness; it could also be due to the damper seat fixing nut becoming loose or coming out, or the power output end connection device being jammed and having no axial clearance, causing the thrust surface to bear abnormal pressure, which in turn causes wear on the thrust surface, damage to the thrust bearing, and ultimately leads to unstable crankshaft operation.
Q:What are some common crankshaft failures?
A:Crankshaft failures are often related to lubrication, assembly, and operation, and in severe cases can lead to engine shutdown.
Small Tips
Key maintenance points for crankshafts
Regular testing
Magnetic particle testing and ultrasonic testing are used to identify cracks, and a dial indicator is used to measure the roundness error of the journal to ensure that the error is controlled within the original factory standard. At the same time, the tightness of the flywheel bolts and the oil pressure are checked to avoid the accumulation of hidden dangers.
01
Standard lubrication
Change the engine oil and filter to the appropriate specifications on time, clean the lubrication oil passages regularly, and check the oil pump condition to prevent dry friction damage to the crankshaft due to insufficient oil supply.
02
Correct assembly
During assembly, ensure that the center lines of the main bearing bush are coaxial, and tighten the main bearing cap bolts step by step from the middle to both sides according to the original factory specifications. Strictly control the fit clearance between the journal and the bearing bush to avoid problems such as incorrect installation direction of the thrust washers.
03
Standard operating procedures
Avoid sudden changes in throttle input during operation, prolonged overload operation, reduce the frequency of emergency braking, and prevent the crankshaft from being subjected to excessive instantaneous torque.
04
Hot Tags: 376-4075 crankshaft for c6.6 diesel engine 3764075, China 376-4075 crankshaft for c6.6 diesel engine 3764075 manufacturers, suppliers, factory
